Epoxy powder paint guarantees superb mechanical resistance as well as resistance to chemicals and corrosion. This method is replacing traditional liquid paints because it offers numerous advantages from both the technical...

Thanks to the innovative, computerized plant, with its painting cabin with 12 industrial robots and manual touch-up gun, New Color works products of varying dimensions, from small items to pieces of significant proportions...

Powder paint fits well with a policy of ecosustainability since it produces no solvent emissions and the plant recovers nearly all the powder used in the treatments. The New Color painting plant has upgraded...

The heat galvanized pieces are washed with a phosphorous-based cleaning agent at 50°C. This is followed by two rinses with demineralized water and a final zinc passivation phase. The wash cycle lasts approximately...

Since 2003, New Color has had a truly advanced powder painting plant (built by Officine Munari of Vicenza) and this plant was further upgraded in 2006. In terms of technology and production capacity, this plant...

After the pre-treatment and wash, and before the true and proper painting, the piece is dried for approximately 15 minutes at 150°C. Once it is perfectly dry, the piece moves on to the painting phase.

After the painting phase, the piece is set in the polymerization oven for 40 minutes at 200°C. Here the epoxy powder melts, forming a uniform layer; i.e. a film with particular toughness and corrosion-proofing properties.

Each phase of the process is performed with a direct view of the product, thus ensuring that the painting process yields excellent results.